Steel Shot-S110

Short Description:

Steel Shot Steel shot blasting is the most widely used process for cleaning, stripping and improving a metal surface. The grade or size of steel shot will determine the ultimate finish achieved on the surface of the metal. The round ball shape of the steel shot produces a clean, smooth and polished surface through a peening action created by the acceleration of the shot. In a peening application, steel shot is also used to impart compressive strength to torque or load bearing metal parts such...

Name: Steel Shot

Size: S110

Send email to us PDF Download

Product Detail

Steel Shot

Steel shot blasting is the most widely used process for cleaning, stripping and improving a metal surface. The grade or size of steel shot will determine the ultimate finish achieved on the surface of the metal. The round ball shape of the steel shot produces a clean, smooth and polished surface through a peening action created by the acceleration of the shot. In a peening application, steel shot is also used to impart compressive strength to torque or load bearing metal parts such as crankshafts, engine turbine blades and heavy-duty springs.

Smaller steel shot will result in a smoother and more polished surface. Larger shot will clean more aggressively but produce a rougher surface. Both air powered and wheel blast systems can be used to accelerate the steel shot onto the surface of the part. Due to the hardness and density of steel shot, it can be recycled as much as 3000 times before replacement. Since steel shot does not use an abrasive process and a minimal amount of dust is created in the blasting process.

Specification

Name		steel shot
Chemistry	(C)	0.70~1.20%
	(Mn)	0.35~1.20%
	(Si)	0.40~1.20%
	(S)	≤0.05%
	(P)	≤0.05%
Average Hardness		40~50HRC(377~509HV) 52~56HRC(543~620HV) 56~60HRC(620~713HV)
Deviation		±3.0HRC(±40HV)
Minumum Density		7.2g/cm3
SAE		S110,S170,S230,S280 S330,S390,S460,S550,S660,S780
Size		0.3,0.5,0.6,0.8,1.0,1.2,1.4,1.7,2.0,2.5mm